PLC data monitoring over the protocols you already run
Read Modbus RTU, Modbus TCP, OPC-UA, MQTT and Siemens S7 devices from a gateway on an industrial PC or Raspberry Pi, and get live dashboards and alerts
The data is in the PLC. Getting it out is the project
Every vendor has its own software, and a mixed floor means a mixed set of tools nobody fully owns.
Mixed-vendor PLCs, drives and meters
Register maps known only to the integrator
Data trapped on a single local PC
No remote access without a security headache
A gateway on your network, reading what is already there
The gateway polls your devices locally and sends readings out over an encrypted outbound connection. No inbound ports, no changes to control logic.
Energy meters, VFDs, PLCs and controllers, with registers described in plain English.
Modern PLCs and existing OPC servers, including Siemens S7-1200 and S7-1500.
Devices and edge gateways that already publish, with per-device keys.
One platform for every device on the floor
Every vendor and every protocol in one place, with alerts, dashboards and history.
- No proprietary hardware
- Outbound-only, encrypted connection
- Old and new equipment side by side
- Your control logic untouched
Modbus and OPC-UA monitoring software, answered.
Modbus RTU, Modbus TCP, OPC-UA, MQTT and Siemens S7. Devices that speak none of these can usually be reached through a protocol converter or an existing PLC.
An ordinary industrial PC, a Raspberry Pi or a supported edge gateway such as Advantech or Teltonika, on the same network as the devices.
No. The gateway makes an encrypted outbound connection. Nothing needs an inbound port, and it reads values without changing them.
See your equipment this afternoon
Describe what you want watched, connect it to the machines you already run, and be live today